Variable friction and high capacity for abseiling, ascending, lowering, hauling and rescue.

Key features include:

• Variable friction design
• Double-braking mechanism
• All component parts visible
• User choice of two threading configurations
• Switch between configurations under load
• High load rating
• Complies with IRATA Code of Practice

Variable friction design allows simple adjustment and positioning on ropes at any angle. A constant low-level of friction is always applied by spring-loaded bobbin, which is held on rope, so friction can be changed immediately and smoothly.

Double-braking mechanism means if handle is released, device brakes, or if handle is squeezed hard (in panic) device also brakes. Device is adjusted by holding handle in "sweet spot".

Inspection and cleaning is simple as all component parts of device are visible and accessible.

Two threading configurations provide different levels of friction, ensuring efficient and ergonomic use. User can switch from one configuration to the other while device is loaded.

High rated load permits pick-off rescues, without requiring additional equipment to increase friction.

Versatile roll stretcher with patented integral casualty harness

Conforms to dynamic performance requirements of EN 361 (full body fall arrest harness). With 125 kg mass.

• Tested with 4m fall, mass of 125 kg
• Integral casualty restraint harness
• Has 6 patient restraint straps to keep casualty secure
• 1 head restraint system
• 1 vertical lift point
• High visibility. High abrasion resistant outer case.
• Retaining straps aligned for rapid fastening
• Integral support stirrup for vertical lifting
• Harness retained completely flat during storage
• Minimal movement needed by casualty during fitting of harness
• Removable interior stiffening sheet
• All components machine washable
• Rolls-up to fit durable PVC storage bag with carrying straps

Available with optional lifting bridle 

Fall arrest harness for WTG technicians, suitable for both onshore and offshore climbing.

Key features include:

• Front attachment point
• Rear attachment / rescue point
• Quick connect leg loops
• Fully adjustable
• Low profile breathable rear panel
• Enhanced protective web sleeves
• Optional work positioning belt

Front attachment point is suitable for fall arrest and vertical systems.

Rear attachment point is designed and positioned at nape of neck to eliminate discomfort when climbing WTG interior ladders. This ensures more vertical orientation of casualty when being lowered during rescue and minimises interference with ladder rungs.

Quick connect leg loops and full adjustability provide easy and comfortable fit.

Adjustable harness structure ensures good fit with maximum comfort and security.

Breathable rear panel provides support and protection while climbing.

Optional work positioning belt can be fitted quickly and easily as required.

Also available in Extra-large, which is also available with extra large positioning belt

Very widely used in fire and rescue service. Selected for use by all official UK Urban Search and Rescue Teams.

Unique, patented product available only from heightec. Special cam X-Cam design is specifically for industrial or professional use and offers immediate purchase on the rope whilst minimising the potential for rope damage. The X-Cam design will continue to hold over 100 kg on a rope even in the extreme event of a sheath being ruptured.

The simplicity and compactness of the HaulCam is a major advantage in allowing non-experts to achieve the lifting of a suspended casualty.

Received innovation award by British Safety Industry Federation.

Not for sale individually

The Manta back-up is an adaptable rope access back-up device with high loading capability and has a maximum rated load for 2 person rescue situations. When tested at heightec’s UK facility, the Manta successfully passed a drop test of 200 kg without damaging the rope. This is critical in emergency situations.

The Manta gives greater margins for safety in low ground clearance situations due to its short arrest distance. Remaining above the user at all times, the Manta is towed by the user via cord attachment and cannot be accidentally dragged down the rope. Should there be a sudden load, the cord detaches and activates the back-up device.

Constructed of alloy body and durable stainless plated steel friction surfaces, the Manta is hard wearing and durable, with no hidden parts or mechanisms make it easy to inspect and clean.

Adopting this new device does not require a change in existing work practices or current kit, therefore a time and cost benefit to the user.

The Manta conforms to European and US standards and are designed to address the "Likelihood and consequence of misuse" clause in the new draft IRATA Code of Practice.

EN 353-2:2002, EN 358:1999, EN 12841:2006 type A ANSI Z.359

Full body harness for Rope Access with side D's & added padding.

Has increased user comfort due to ergonomically designed, shoulder, waist and leg pads.

Adjustable and releasable shoulder straps

● For greater fit and comfort

Large front stainless steel ring

● For easy attachment of descenders, lanyards & cows tails

● Reduces bulk at front of harness

Elastic tidy's

● Stows spare webbing away from hazards

● Prevents karabiners snagging

ID label

● Encased in a protective tube, giving a longer life span

Gear racks with PVC tube

● For increased storage

Dynamically tested with 125 kg.

EN 361, EN 813

Compact evacuation descender system for self rescue. Allows a person to make a fine controlled descent from high level. The micro sized descender employs a unique, patented braking system that gives double-action safety and fine control using high-strength heat-resistent aramid cord.
Designed for anyone working at height.
Compact size with "full size" functionality will appeal to many industries but in particular i.e. wind energy, renewable, electricity distribution, offshore, tower cranes, police and MOD.
It's light weight (only 1.1 kg for a 30m descent kit) and compact size, this evacuation system can easily be carried on the users harness.

Supplied with the two karabiner shown, plus one extra along with a 30cm protected nylon sling.

Load rated to 125kg.

This device is designed for single use only.

British Safety Industry Federation Highly Commended.

Various lengths available please call for details.

- Front attachment / rescue point
• Rear attachment point
• Fully adjustable
• Enhanced protective web sleeves
• Contrasting colour leg and torso webbing

Front attachment point is suitable for fall arrest, vertical systems and rescue.

Adjustable harness structure ensures good fit with maximum comfort and security.

Contrasting colour of leg and torso webbing assists correct fitting of harness for less experienced user.

ANSI version also available

Award winning rescue harness for vertical rescue, confined space entry and fall arrest.

Key features include:

• Quick and easy to fit
• Highly durable and comfortable to wear
• Integral back panel
• Semi-circular screwlink front attachment point
• High rear attachment point
• Protective leg loop sleeves
• Adjustable locking side buckles
• Captive buckles with large tabs
• Accessory D-loop on chest

Integral back panel and semi-circular screwlink permits safe multi-directional loading for casualty attachment.

Front attachment point is rated for fall arrest, it can be used for lowering or raising and suspension.

Rear attachment point is rated for fall arrest and suspension, it is positioned high to be compatible with breathing apparatus and is reachable by the user.

Highly-durable Cordura sleeves provide added protection and wear resistance for the leg loops.

Adjustable side buckles allow for added comfort and sizing, but lock to prevent accidental release.

Buckles are captive to prevent disassembly and with large tabs for easy adjustment even wearing gloves.

Accessory D-loop allows attachment of torch, radio etc

Also available in XXL

The Piranha pole belt adjustable lanyard is a compact device used for work positioning on masts, towers, pylons or other lattice structures in the telecoms, power and entertainment industries.

The Piranha has a gradual action and can be accurately controlled with one hand - for both taking in and paying out.

Includes 2m x 12 mm diameter UV stabilised high strength TECTRA rope complete with abrasion protection, sewn terminations and safety hook termination. 10 mm Screwlink supplied for connection to harness D ring.

An additional safety back-up should always be employed when using positioning equipment. Always place equipment so as to minimise a potential fall.

Tower rescue and evacuation descender designed for two person loads with double action safety mechanism which will brake if the user either lets go or squeezes too hard in panic.

The PowerLock can easily adjust the amount of slack rope prior to descent and provides excellent braking control, even with a load of two persons.

This product has a patented secondary braking system which increases the braking force applied by the user.

When tested on new Tectra 11 mm low stretch rope, these ascenders were found to be 25% stronger than their most popular sharp toothed competitor, with average breaking loads of around 675 kg for X-cams versus 535 kg for the established design.

However, the greatest increase in performance is exhibited if the ascender continues to be loaded after the sheath of the rope has ruptured.

In this situation, X-Cams will hold up to 200 kg on the broken sheath and rope cores. Established toothed designs supported only around 30kg in heightec tests - nowhere near enough to support a person.

X-Cam design gives increased performance over traditional sharp tooth design
• Cam exerts considerable grip on rope after sheath has broken
• Cam doesn't pluck rope
• Easy to remove from rope if accidentally jammed into knot

Two attachment points
• Keeps cowstail and footloop separate
• Eliminates need to open a loaded karabiner

Also available in left handed version

The Quadra is an integral component of our RescuePack and ScaffPack casualty recovery systems.
This unique, patented, stainless steel rope device has a diverse range of functions, allowing lowering, hauling, paying out of a safety rope (lifelining) and descent.
The Quadra can change instantly from one mode to another whilst under load. A special braking mechanism increases the frictional force for lowering heavy loads.

Not for sale individually.

Twin fall arrest lanyard of the very highest specification, allowing continuous connection to a ladder or structure when climbing masts and towers.

Specially compact energy absorbing element has high strength stainless steel connecting ring.

The lanyard arms are made from patented Paraloc low stretch rope, a new design which virtually eliminates the kinking which occurs with normal kernmantel rope versions.

The back-up webbing and stitching exceed the tensile strength requirements of European standard EN 355 by 50% and it has been dynamically tested with a load of 125 kg without damage.

The stainless connecting ring will allow it to withstand a substantial fall even in cases of extreme misuse, such as when the energy absorbing element is bypassed.

When tested on new Tectra 11 mm low stretch rope, these ascenders were found to be 25% stronger than their most popular sharp toothed competitor, with average breaking loads of around 675 kg for X-cams versus 535 kg for the established design.

The greatest increase in performance is exhibited if the ascender continues to be loaded after the sheath of the rope has ruptured.

In this situation, X-Cams will hold up to 200 kg on the broken sheath and rope cores. Established toothed designs supported only around 30kg in heightec tests - nowhere near enough to support a person.

The twist is:
• Easy to remove if jammed against knot
• Profiled attachment points For improved orientation
• Slimline design sits flat on the body
• Ergonomic low profile release catch Allows single handed operation
• Can be detached from the harness
• Economic to replace, no need to replace entire harness

The Vector fall arrest rope grab is an ideal device for roof or ladder climbing work.

Can be used for fall arrest when used vertically and for work restraint when used horizontally or on sloping roofs.

Designed to be used on 10.5-11.0 mm diameter low stretch rope, the Vector moves up and down freely with the user allowing a higher degree of flexibility whilst working.

Conforms to EN 353-2 (vertical fall arrest) and EN358 (work positioning) standards.